Introduction

Availability

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Scalable runtime
Allows additional run time to be quickly added as needed.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Manageability

Serial connectivity
Provides management of the UPS via a serial port.

LED status indicators
Quickly understand unit and power status with visual indicators.

Network manageable
Provides remote power management of the UPS over the network.

SmartSlot
Customize UPS capabilities with management cards.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

Adaptability

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Serviceability

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Protection
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Marketing Features
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Save time with easy and convenient remote accessibility.

Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Features

UPS topology

Double-conversion (Online)

Output power capacity

1.5 kVA

Output power

1350 W

Waveform

Sine

Input operation voltage (min)

220 V

Input operation voltage (max)

240 V

Input frequency

40/70 Hz

Output operation voltage (min)

220 V

Output operation voltage (max)

240 V

Output frequency

50/60 Hz

Surge energy rating

340 J

Crest factor

3:1

Emergency Power Off (EPO)

Y

Noise level

50 dB

Surge protection

Y

Audible alarm(s)

Y

Auto-restart

Y

Ports & interfaces

AC outlet types

C13 coupler

Power plug

C14 coupler

AC outlets quantity

8 AC outlet(s)

USB port

Y

Serial interface

Y

Serial interface type

RJ-45

Serial ports quantity

1

Ethernet LAN (RJ-45) ports

1

Cabling technology

10/100Base-T

SmartSlot

Y

Battery

Battery technology

Lithium-Ion (Li-Ion)

Battery life (max)

10 year(s)

Battery recharge time

6 h

Hot-swap battery

Y

Automatic battery test

Y

Cold start

Y

Design

Form factor

Rackmount

Rack capacity

3U

Product colour

Black, Grey

Display type

LCD

LED indicators

Status

International Protection (IP) code

IP20

Certification

CE, EAC, RCM, VDE

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-20 - 50 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Operating altitude

0 - 3000 m

Non-operating altitude

0 - 15000 m

Weight & dimensions

Width

432 mm

Depth

590 mm

Height

128 mm

Weight

25.7 kg

Package width

600 mm

Package depth

850 mm

Package height

445 mm

Package weight

37.4 kg

Logistics data

Products per pallet

6 pc(s)

Other features

Output voltage

230 V